Follow these instructions on how to develop a pattern for your vehicle. When the pattern has been developed follow the instructions on how to install the film on your vehicle.
1. Start with a clean car ensure surfaces are completely clean and the paint work is free from any types of polish.
2. Using sticky tape mark the edges of the area to be covered with film. position low tack tracing paper or you can use tracing paper and 3m low tack spray mount available from Art shops or hobbycraft. or Fablon from DIY shops.
3. Use a soft pencil eg 2B or CD marker pen and draw around the edge to create the film pattern template.
4. Carefully remove the low tack tracing paper or fablon. Using the tacky side carefully position on the paint protection film, carefully cut the film round the template
1. Start with a clean car ensure surfaces are completely clean and the paint work is free from any types of polish.
2. Using sticky tape mark the edges of the area to be covered with film. position low tack tracing paper or you can use tracing paper and 3m low tack spray mount available from Art shops or hobbycraft. or Fablon from DIY shops.
3. Use a soft pencil eg 2B or CD marker pen and draw around the edge to create the film pattern template.
4. Carefully remove the low tack tracing paper or fablon. Using the tacky side carefully position on the paint protection film, carefully cut the film round the template
Premier Paint Guard
01926 811652
01926 811652
© PPG all rights reserved
Buy a Template kit, includes styling tape, 3 metres self adhesive film, marker pen click here
© SW-2 marketing 2006-8. All rights reserved. 3M & Scotchgard are trademarks of 3M - paint protection film-
Premier Paint Guard
3M™ Scotchgard™
Paint Protection Film
3M™ Scotchgard™
Paint Protection Film
DIY Page
